At present, mobile phones use two types of lithium batteries, lithium ion and lithium polymer. Two battery cathode materials are the same as the general
Lithium cobalt are (three lithium iron phosphate material and the current cell phone battery is not in-kind goods), the main difference lies in the
Lithium-ion laptop battery electrolyte is a lithium hexafluorophosphate, lithium polymer battery is a solid polymer electrolyte. The basic polymer battery
Sony Ericsson are specific batteries. In general, the polymer battery discharge more evenly, better security, but it cost more than
Higher.
Two rechargeable lithium batteries of the same note. Well, I say a few words focus on the safety characteristics of lithium batteries. Since the lithium
Battery does not have sufficient protection, charge-off is to say very easily lead to an explosion, so all of the lithium battery makers in the city
The installation of an internal power control circuit chip, charge-off immediately after the power automatically. But on the contrary NiMH batteries, have their own charge
Little impact as long as the temperature in the temperature about security, basic accident will not happen. The safety of lithium power in the temperature of 180 degrees
Over the temperature extremely vulnerable to an explosion.
Then buy a new cell phone, the battery charge how better? Because any piece of lithium batteries at the factory must be done before an
Detection of the whole process will be equivalent to the activation therefore ensure that cathode material of lithium-ion free access, and
Lattice did not collapse. Therefore, the battery in the hands of ordinary consumers, are strictly tested the activation step, not Tam
Activation state of mind.
Now the popular on-line three times before filling 12 hours of the origin of the argument, before the first cell phone batteries for nickel-hydrogen batteries,
For instance, Nokia 3310, Ni-MH battery factory without activation, and it has its own latitude battery memory effect, so in order to make electricity
To achieve the best performance, often require users to charge the first time the full, and complete power to put End (1 by the voltage.
2v to 1.0v), this can prevent memory effect. If the beginning of a short-time charging, the battery has not completely excited
Live, 1000mAh battery may be sufficient to 900mAh, regardless of efficiency in the use of cell or battery life itself are very
Big impact.
The same method used in lithium batteries body will be what? Lithium cobalt because of the different characteristics of crystal hydroxide
Nickel, nickel hydroxide more prone to collapse lattice. Therefore, charge, charge-off if the time is too long
Lithium cobalt easier to make room for failure activity, together with the charge is bound to lead to temperature, one of the cathode material impact, and
And may also lead to danger. For this reason, we in the use of lithium in the process of power will never run out of battery power all the
Re-charge, as lithium cobalt will be a serious failure, shortened life expectancy. The correct way is not to wait until the battery is running out before charging
, And battery charging instructions on the completion of the power off immediately.
Used in mobile phone charging method, the most appropriate is: off charge off the assembly line, at full power immediately unplug and then
The use of the boot.
Do not put all the security issues to the internal 53977 protection circuit, because sometimes that failure, such as de
ll the battery explosion is a vivid example.
Lithium cobalt are (three lithium iron phosphate material and the current cell phone battery is not in-kind goods), the main difference lies in the
Lithium-ion laptop battery electrolyte is a lithium hexafluorophosphate, lithium polymer battery is a solid polymer electrolyte. The basic polymer battery
Sony Ericsson are specific batteries. In general, the polymer battery discharge more evenly, better security, but it cost more than
Higher.
Two rechargeable lithium batteries of the same note. Well, I say a few words focus on the safety characteristics of lithium batteries. Since the lithium
Battery does not have sufficient protection, charge-off is to say very easily lead to an explosion, so all of the lithium battery makers in the city
The installation of an internal power control circuit chip, charge-off immediately after the power automatically. But on the contrary NiMH batteries, have their own charge
Little impact as long as the temperature in the temperature about security, basic accident will not happen. The safety of lithium power in the temperature of 180 degrees
Over the temperature extremely vulnerable to an explosion.
Then buy a new cell phone, the battery charge how better? Because any piece of lithium batteries at the factory must be done before an
Detection of the whole process will be equivalent to the activation therefore ensure that cathode material of lithium-ion free access, and
Lattice did not collapse. Therefore, the battery in the hands of ordinary consumers, are strictly tested the activation step, not Tam
Activation state of mind.
Now the popular on-line three times before filling 12 hours of the origin of the argument, before the first cell phone batteries for nickel-hydrogen batteries,
For instance, Nokia 3310, Ni-MH battery factory without activation, and it has its own latitude battery memory effect, so in order to make electricity
To achieve the best performance, often require users to charge the first time the full, and complete power to put End (1 by the voltage.
2v to 1.0v), this can prevent memory effect. If the beginning of a short-time charging, the battery has not completely excited
Live, 1000mAh battery may be sufficient to 900mAh, regardless of efficiency in the use of cell or battery life itself are very
Big impact.
The same method used in lithium batteries body will be what? Lithium cobalt because of the different characteristics of crystal hydroxide
Nickel, nickel hydroxide more prone to collapse lattice. Therefore, charge, charge-off if the time is too long
Lithium cobalt easier to make room for failure activity, together with the charge is bound to lead to temperature, one of the cathode material impact, and
And may also lead to danger. For this reason, we in the use of lithium in the process of power will never run out of battery power all the
Re-charge, as lithium cobalt will be a serious failure, shortened life expectancy. The correct way is not to wait until the battery is running out before charging
, And battery charging instructions on the completion of the power off immediately.
Used in mobile phone charging method, the most appropriate is: off charge off the assembly line, at full power immediately unplug and then
The use of the boot.
Do not put all the security issues to the internal 53977 protection circuit, because sometimes that failure, such as de
ll the battery explosion is a vivid example.
Tags:
Post comment:
◎welcome to give out your point。